fire alarm call point

... a fire alarm signal. The key features of an addressable pull station are: Addressability: Each pull station has a unique digital address that is recognized by the fire alarm control panel. This allows the control panel to identify the exact location of an

... Resistance ≤0.2ohm Temp. Range -10℃~+50℃ Max. Relative Humidity ≤93RH±2% LED indicator green for working, red for alarm Type Can't be reset Color Red,Green,Yellow Use school/ hotel/ home..etc

CE Approved addressable manual call point , call point break glass Manual Fire Alarm Call Point VI-203 is a Green Color Break Glass Fire Emergency Exit Release Button,Suitable for Exit Door,Emergency Door Product Parameter Parameter Description Abmessungen...

...Fire Alarm Call Point Parameter for break glass manual fire alarm call point: 1. Working voltage: 12/24VDC 2. Power: 10W 3. Switch state: Normally closed open (single or dual) 4. Color: Red, Green 5. Dimensions: 87mm*87mm*51mm . Materical: ABS plastic Color: Red / green/white/yellow (Optional) One year warranty Fire alarm break glass with manual call point Suitable for exit door or emergency door NC/NO/DPDT optional Manual fire

... Brand: ● HONEYWELL ● AB ● OMRON ●SIEMENS ●SCHNEIDER ● ROSEMOUNT● ABB ● NOTIFIER ●MTL ● GE ●And many more ! HONEYWELL TC806B1076 SMOKE DETECTOR For Fire Alarm System Point

...Alarm Point Addressable Fire Alarm System CE ROHS Manual Call Point D135C Asenware Conventional Manual Call Point OVERVIEW The D135C conventional manual call point is designed to be use with an intelligent two-wire control system. If it is pressed after a fire is manually confirmed, an alarm signal may be sent to a fire alarm control system which will, after receiving the alarm signal, display the equipment status of the manual call points

...Alarm System F200 Points Addressable Fire Alarm Control System Control Panel It is suitable for places where electrical fire, solid surface fire, liquid fire, gas fire that can cut off the air source may occur. Used to match FM200 fire extinguishing device, inert gas fire extinguishing device IG541, S type aerosol fire extinguishing device, high and low pressure carbon dioxide fire...

Red Color Call Point Resettable Manual Emergency Call Point Keywords Call Point; resettable call point, fire alarm call point; emergency button, breakglass button, fire alarm button,press to break glass button; Features 1, glass appearance maintains ...

... and avoid mistakes. Connect conventional detector, manual call point or fire hydrant button, and deliver the alarm signal to the controller. Gas fire extinguishing system and fire alarm equipment linkage debugging has been completed, when a fire occurs in

...fire alarm systems manual call point,break glass Available for flush or surface mounting Plastic film on glass Test key inserted from side Open circuit with series resistor Suitable for the majority of conventional fire alarm systems Specifications: System Voltage (nominal): 24 VDC (9V~ 28VDC) Standby Current: 60 μA @ 24VDC Alarm...

...fire alarm systems manual call point,break glass Available for flush or surface mounting Plastic film on glass Test key inserted from side Open circuit with series resistor Suitable for the majority of conventional fire alarm systems Specifications: System Voltage (nominal): 24 VDC (9V~ 28VDC) Standby Current: 60 μA @ 24VDC Alarm...

... of intelligent integrated wireless fire alarm control panel designed and developed under our company's full investigation of the fire protection market demand, summarizing the company's fire engineering experience in the fire protection industry for many

...two buses). It complies with the provisions of both Fire Alarm Control Units (GB4717-2005) and Automatic Control System for Fire Protection (GB16806-2006). Features 1 The intelligent detectors and the intelligent modules have internal microprocessors to

Model:JS-FAS07 Fire Alarm Input Device /Conventional Manual Call Point for Fire Alarm System 1. Rated voltage: 12/24VDC/220VAC Optional 2. Consumption: 10W 3. SPL(dB/1m): 103 4. Dimension: 87mmL*87mmW*51mmH

Fire Detection Alarm - Hand Alarm Package Size 175x175x145mm for Reliable Performance Product Description: Li Jing hand-held fire alarm is a fire alarm suitable for fire detection and alarm. It is made of high quality aluminum alloy to ensure its rust resistance and durability. The package size is 345*240*225mm, light weight and easy to carry. The fire detection alarm...

...fire alarm control panel 8 zones multi-line alarm host, each channel can connect 25 detectors, intuitive one-to-one status display, one way sound and light alarm output, one way fire alarm, fault, monitoring alarm output. A fire alarm control panel (FACP), fire alarm control unit (FACU), or simply fire alarm panel is the controlling component of a fire alarm...

..., and emergency lighting circuits. These cables are designed to continue to operate for a period of time in a fire situation.​ 2. Specifications 1. Type:fire alarm cable 2. Use: fire alarm systems 3. Interface type: 2-core, 3-core, 4-core 4. Feature:

CE Antiwear Fire Rated Fire Alarm Cable , PVC Copper Smoke Alarm Wire We ensure we use top quality material sheath and purity copper All these fire resistand cable comply the LPCB RULE AND FIRE RESISTANT cable required Our cable is good for buliding,ground...

... the output control module starts the alarm, it is ringing alarm signal to inform the proximate persons of the need to take action, usually to evacuate. Working principle : When a fire occurs, smoke in the air contained in the particle concentration and

...Fire Alarm Cable Solid Copper Conductor FPL-CL2 PVC Quick Details Power Limited Fire Alarm Cable 12 AWG, FPL-CL2 Solid Bare Copper Conductor Unshielded Types: 2C Shielded Types: 2C Shielded with PET / AL-Foil Tinned Copper Drain Wire Non-Plenum PVC Jacket 500FT, 1000FT, Plastic / Wooden Spool, Carton Power Limited Fire Alarm Cable Description ZION is the leading manufacturer of fire alarm system cables for the fire